E-Mail Setting - Konica Minolta bizhub c20 Service Manual

11. UTILITY mode
V. APPLETALK
Function • Select whether or not to enable AppleTalk.
• If [ENABLE] is selected, AppleTalk is enabled.
Use
• If [DISABLE] is selected, AppleTalk is disabled.
• The default setting is ENABLE.
Setting/
procedure
W. SPEED/DUPLEX
Function • Sets the communication speed and method of network.
Use • To set the network communication speed and method.
• The default setting is AUTO.
Setting/
"AUTO"
procedure
100BASE FULL
X. IEEE802.1X
• Prevents unauthorized access by performing authentication by the RADIUS server
Function
under the network environment.
• Set this function to YES when a network connection is made using the authentication
Use
server (RADIUS server).
• The default setting is DISABLE.
Setting/
procedure
11.4.4

E-MAIL SETTING

A. SMTP
Function • Select whether or not to enable SMTP.
• If [ENABLE] is selected, SMTP is enabled.
Use
• If [DISABLE] is selected, SMTP is disabled.
• The default setting is ENABLE.
Setting/
procedure
B. SENDER NAME
Function
• This function is used to specify the sender's name.
Use
Setting/ • The default setting is bizhub_C20.
procedure • Up to 20 characters can be entered for the sender name.
C. E-MAIL ADDRESS
Function • This function is used to specify the e-mail address of the sender.
NOTE
Use
• Please consult customer's network administrator for information about the e-mail
address to use.
• Up to 64 characters can be entered for the sender address.
Setting/
• If customer does not receive e-mail on the copier, enter the e-mail address of the cus-
procedure
tomer's administrator.
142
DISABLE
10BASE FULL
100BASE HALF
"DISABLE"
DISABLE
Field Service Ver. 1.0 Sep. 2008
"ENABLE"
10BASE HALF
1000BASE FULL
ENABLE
"ENABLE"