Scanner Unit - Konica Minolta bizhub c20 Service Manual

7. Other
[2]
13. Remove the 1st image transfer pressure/retraction clutch assy.
See the steps 1 to 2 on P.101 "1st image transfer pressure/retraction clutch".
7.3.19

Scanner unit

1. Remove the NCU board.
See P.64
[2]
[1]
[1]
86
[1]
[1]
A00FF2C059DA
[3]
A0FDF2C589DA
[2]
A0FDF2C046DA
Field Service Ver. 1.0 Sep. 2008
12. Remove seven screws [1], and
remove the driving unit [2].
NOTE
• When installing the driving unit
assy, take care not to damage or
soil the gears.
2. Disconnect five connector [1], and
remove the screw [2] of the ground
terminal.
3. Pull out the harnesses from the
metal plate [3].
4. Open the scanner unit.
5. Remove the screw [1], and remove
the stopper [2].