Fax Rx Operation; Memory Rx Mode; No. Of Rings; Reduction Rx - Konica Minolta bizhub c20 Service Manual

Field Service Ver. 1.0 Sep. 2008

11.8 FAX RX OPERATION

11.8.1

MEMORY RX MODE

Function • This function can be used to set whether to allow [ON] memory reception or not [OFF].
In cases when confidential faxes are being received, the received document can be
stored in the memory and printed at a specified time or when memory reception is set to
[OFF]. A password can be set to specify the starting time or ending time of memory
Use
reception, or to cancel the function. The set starting time and ending time are valid every
day until memory reception is turned off.
• The default setting is OFF.
Setting/
ON: Enable memory RX mode
procedure
"OFF": Disable memory RX mode
11.8.2

NO. of RINGS

Function
• This function can be used to set the number of rings between 1 and 16 until the call is
answered.
Use
• Default: Depends on [PTT SETTING].
• Depend on soft switch setting of marketing area.
Setting/
1: Once
procedure
7: 7 times
13: 13 times 14: 14 times 15: 15 times 16: 16 times
11.8.3

REDUCTION RX

Function • This function can be used to set whether documents longer than the paper are printed
reduced [ON], split [OFF], or discarded [CUT]. However, when sending a document
more than 24 mm (1 inch) longer than the paper, [CUT] is not available. (In this case, the
Use
document is split.)
• The default setting is ON.
Setting/ OFF: 100% RX mode
procedure "ON": Reduction print mode
CUT: Cut mode
"2": Twice 3: 3 times
8: 8 times 9: 9 times
11. UTILITY mode
4: 4 times 5: 5 times
10: 10 times 11: 11 times 12: 12 times
6: 6 times
155