Konica Minolta bizhub c20 Service Manual page 183

11. UTILITY mode
D. DHCP
• Automatically acquires an IP address from the DHCP server, if there is one in the net-
Function
work, and specifies whether to load other network information.
Use • To automatically acquire an IP address and load other network information.
• The default setting is ENABLE.
Setting/
procedure
NOTE
• When setting the IP address manually, the [DHCP] setting is changed to [DIS-
ABLE].
E. BOOTP
• Automatically acquires an IP address from BOOTP and specifies whether to load other
Function
network information.
Use • To automatically acquire an IP address and load other network information.
• The default setting is DISABLE.
Setting/
procedure
NOTE
• When setting the IP address manually, the [BOOTP] setting is changed to [DIS-
ABLE].
F. ARP/PING
• Automatically acquires an IP address from ARP/PING and specifies whether to load
Function
other network information.
Use • To automatically acquire an IP address and load other network information.
• The default setting is DISABLE.
Setting/
procedure
NOTE
• When setting the IP address manually, the [ARP/PING] setting is changed to [DIS-
ABLE].
G. HTTP
Function • Select whether or not to enable HTTP.
• If [ENABLE] is selected, HTTP is enabled.
Use
• If [DISABLE] is selected, HTTP is disabled.
• The default setting is ENABLE.
Setting/
procedure
H. FTP SERVER
Function • Select whether or not to enable the FTP server.
• If [ENABLE] is selected, FTP server is enabled.
Use
• If [DISABLE] is selected, FTP server is disabled.
• The default setting is ENABLE.
Setting/
procedure
138
DISABLE
"DISABLE"
"DISABLE"
DISABLE
DISABLE
Field Service Ver. 1.0 Sep. 2008
"ENABLE"
ENABLE
ENABLE
"ENABLE"
"ENABLE"