Konica Minolta bizhub c20 Service Manual page 184

Field Service Ver. 1.0 Sep. 2008
I. FTP TX
Function • Select whether or not to enable the FTP client.
• If [ENABLE] is selected, FTP client is enabled.
Use
• If [DISABLE] is selected, FTP client is disabled.
• The default setting is ENABLE.
Setting/
procedure
J. SMB
Function • Select whether or not to enable SMB.
• If [ENABLE] is selected, SMB is enabled.
Use
• If [DISABLE] is selected, SMB is disabled.
• The default setting is ENABLE.
Setting/
procedure
K. BONJOUR
Function • Select whether or not to use the bonjour setting.
• To use when operating under the bonjour service environment.
Use • If [ENABLE] is selected, Bonjour is enabled.
• If [DISABLE] is selected, Bonjour is disabled.
• The default setting is ENABLE.
Setting/
procedure
L. DYNAMIC DNS
Function • Select whether or not to enable Dynamic DNS.
• If [ENABLE] is selected, Dynamic DNS is enabled.
Use
• If [DISABLE] is selected, Dynamic DNS is disabled.
• The default setting is DISABLE.
Setting/
procedure
M. IPP
Function • Select whether or not to enable IPP.
• If [ENABLE] is selected, IPP is enabled.
Use
• If [DISABLE] is selected, IPP is disabled.
• The default setting is ENABLE.
Setting/
procedure
N. RAW PORT
(1) DISABLE/ENABLE
Function • Select whether or not to enable the raw port.
• If [ENABLE] is selected, raw port is enabled.
Use
• If [DISABLE] is selected, raw port is disabled.
• The default setting is ENABLE.
Setting/
procedure
DISABLE
DISABLE
DISABLE
"DISABLE"
DISABLE
DISABLE
11. UTILITY mode
"ENABLE"
"ENABLE"
"ENABLE"
ENABLE
"ENABLE"
"ENABLE"
139