Konica Minolta bizhub c20 Service Manual page 70

Field Service Ver. 1.0 Sep. 2008
[1]
13. To reinstall, reverse the order of removal.
14. From the Menu, select [MAINTENANCE MENU] → [SUPPLIES REPLACE] →
[TRANSFER BELT] and execute this function to reset the transfer belt counter value.
For details, see "Adjustment/Setting."
15. From the Menu, select [MAINTENANCE MENU] → [AIDC MODE] and execute this
function.
For details, see "Adjustment/Setting."
[1]
[2]
A0FDF2C519DA
3. Periodical check
12. Insert the transfer belt [2] along the
rails [1].
NOTE
• When inserting the unit, use care
not to allow the docking gear to hit
against the rail or other mechanism
to prevent damage.
25