Konica Minolta bizhub c20 Service Manual page 191

11. UTILITY mode
D. SSL SETTING
Function • To set whether to use SSL (data encryption) for connecting to LDAP server.
Use • To use SSL (data encryption) for connecting to LDAP server.
• The default setting is DISABLE.
Setting/
procedure
E. SEARCH BASE
Function • To set the directory path for LDAP server.
Use • To enter the directory path for LDAP server.
1. Select the [SEARCH BASE], then press Select key.
Setting/
2. Specify the database where the LDAP server is searched, then press Select key.
procedure
• The search base can contain a maximum of 64 characters.
F. ATTRIBUTE
Function • To set a search attribute that is used to search a destination from LDAP server.
Use • To enter a search attribute that is used to search a destination from LDAP server.
1. Select the [ATTRIBUTE], then press Select key.
Setting/
2. Type in the attribute, then press Select key.
procedure
• The attribute can contain a maximum of 32 characters.
G. SEARCH METHOD
Function • To set a search method that is used to search a destination.
Use • To change a search method that is used to search a destination.
• The default setting is CONTAIN.
Setting/
procedure
H. LDAP TIMEOUT
Function • To set the Max. time-out period for LDAP search.
Use • To change the Max. time-out period for LDAP search.
• The default setting is 60 sec. (5 - 300 sec.)
Setting/
1. Select the [LDAP TIMEOUT], then press Select key.
procedure
2. Type in the length of time (in seconds) until the LDAP search times out, then press
Select key.
I. MAX. SEARCH RESULTS
Function • To set the Max. results of address for LDAP search.
Use • To change the Max. results of address for LDAP search.
• The default setting is 100 (5 - 100)
Setting/
1. Select the [MAX. SEARCH RESULTS], then press Select key.
procedure
2. Type in the maximum number of items, then press Select key.
146
"DISABLE"
BEGIN "CONTAIN"
Field Service Ver. 1.0 Sep. 2008
ENABLE
END