Konica Minolta bizhub c20 Service Manual page 112

Field Service Ver. 1.0 Sep. 2008
6. Remove parameter chip [1] from the print control board.
NOTE
• When the print control board (PRCB) has been replaced, be sure to remount
parameter chip. Unmount parameter chip from the old print control board and
mount it on the new print control board.
A0FDF2C586DA
[1] [2]
[1]
A0FDF2C587DA
4. Disconnect all connectors and flat
cables from the print control board.
5. Remove eight screws [1], and
remove the print control board [2].
[1]
7. Other
A00FF2C028DA
67