Konica Minolta bizhub c20 Service Manual page 126

Field Service Ver. 1.0 Sep. 2008
[1]
[2]
[1]
3. Insert the PH unit connector [1] and
[3]
A0FDF2C040DA
4. Install the PH unit [1] into the main
NOTE
• After the PH unit installation, check
that the shield sheet is grounded
properly onto the base of the PH
unit.
• Make sure that the shield sheet
does not have any unnecessary
crease, positional misalignment nor
loose attachment.
A0FDF2C041DA
flat cable [2] from the positions
shown in the left illustration. Then
route them to the rear direction.
body.
7. Other
81