Output Options; Thin Stapled Sets; Out Of Staples Option - Xerox Document Centre 255 LP Reference Manual

Output Options

How to get here
Tools Screen 1
System Settings
System Settings 1
More
System Settings 2
Output Options

Thin Stapled Sets

This option and one or more of its options may or may not appear
depending on your hardware configuration. Stapling thin sets (sets
between 2 and 15 sheets of paper) poses a special challenge because
of the rise in paper caused by the added thickness of the staple.
Thickness caused by staples
This button allows you to change the following:
l
l
l

Out Of Staples Option

Complete job without stapling - If this option is selected, the job
will print without stapling. Any remaining sets will be printed
without staples.
Fault/Hold job - If this option is selected, the job will be held until
a staple cartridge is replaced.
Any jobs requiring stapling that have not started will not print. Any
jobs in the process of printing requiring stapling will be faulted.
Xerox Document Centre Reference Guide
The number of sheets the machine will consider as a thin
stapled set.
The number of thin stapled sets that will be produced before the
machine will automatically pause.
What will happen after the machine pauses; it will either
automatically resume or remain paused.
System Tools
Page 6 - 27