Wireless Configuration Commands - Motorola RFS7000 Series Reference Manual

Use the
(config-wireless)

20.1 Wireless Configuration Commands

Table 20.1 summarizes the Global Config commands.
Command
aap Envokes AAP commands to define how the switch passes adaptive AP
configurations to adopted APs.
adopt-unconf- Adopts a radio even if not configured. The default templates is used for
radio configuration.
adoption-pref-id Defines a preference identifier for the switch. All radios configured with
this identifier are more likely to be adopted by this switch.
ap Envokes AP related commands to define the name and location of the AP. page 20-7
ap-detection Access port detection configuration commands.
ap-ip Modifies static IP information for access ports.
instance to configure wireless parameters.
Table 20.1 Wireless Configuration Command Summary
Description
Wireless Instance
Ref.
page 20-4
page 20-5
page 20-6
page 20-8
page 20-9