Table 6.20 Messages In The [Connection Check] Window Or [Connection Check Information] Window; Table 6.21 Messages In The [Result Of Connection Check] Window; Table 6.22 Messages In The [Temporary Disconnection] Window Or [Reconnection] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0123
RMG_0124
RMG_0125
RMG_0126
-

TABLE 6.20 Messages in the [Connection check] window or [Connection check information] window

Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0015
RMG_0041
RMG_0053
RMG_0055
RMG_0056
RMG_0058
RMG_0181
RMG_0182
RMG_0183
Message code
RMG_0002
RMG_0004
RMG_0041
RMG_0056
RMG_0058
RMG_0185

TABLE 6.22 Messages in the [Temporary Disconnection] window or [Reconnection] window

Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0041
RMG_0059
RMG_0060
Exportation of the environment information
has been completed.
Exportation of the customer information has
been completed.
Export customer information to a file.
Export the environment information to a file.
Close this screen after you finish export.
Failed to get Machine status. (xxx)
Invalid CGI parameter specified.
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to setting Machine status.(xxx)
Execute the connection check. Are you sure?
Connection check frame display completed.
Failed in the connection check notification.
(xxx)
Connection check notification completed.
Invalid E-mail address specified.
Enter E-mail address of administrator or
installer.
Specify [E-mail address for receiving results.].

TABLE 6.21 Messages in the [Result of connection check] window

Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to setting Machine status. (xxx)
Failed in the connection check
notification.(xxx)
Connection check notification completed.
None.
Connection check frame display completed.
Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to setting Machine status.(xxx)
Execute temporary disconnection to the
REMCS Center. Are you sure?
Reconnection to the REMCS Center
Message
Message
Message
60
problem is not solved,
contact the support center.
None.
Click the [OK] or [Cancel]
button
Close the screen after
finishing export.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Click the [OK] or [Cancel]
button
None.
Enter a valid value.
Specify a valid value.
Enter a valid value.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Check whether the network
status is normal.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Click the [OK] or [Cancel]
button.
None.
CA92344-0542-02