For an individual switch, the following page is displayed:
The following entries are displayed on this screen:
Global Config
Cluster:
Cluster Role:
Cluster Management-vlan
VLAN ID:
17.3.2 Cluster Config
On this page you can configure the status of the cluster the switch belongs to.
Choose the menu Cluster→Cluster→Cluster Config to load the following page.
For a candidate switch, the following page is displayed.
Figure17-12 Cluster Summary for Individual Switch
Displays the cluster status (enabled or disabled) of the switch.
Displays the role the switch plays in the cluster.
Displays the management VLAN ID of the switch.
Figure17-13 Cluster Configuration for Candidate Switch
368