Basic Config - TP-Link JetStream T2700G-28TQ User Manual

VRRP Configuration

Before configuring VRRP, users should plan well to specify the role and function of the devices in
backup groups. Every switch in backup group should be configured, which is the precondition to
construct a backup group.

10.10.1 Basic Config

VRRP (Virtual Routing Redundancy Protocol) is a function on the Switch that dynamically assigns
responsibility for a virtual router to one of the VRRP routers on a LAN. The VRRP router that
controls the IP address associated with a virtual router is called the Master, and will forward
packets sent to this IP address. This will allow any Virtual Router IP address on the LAN to be
used as the default first hop router by end hosts.
Choose the menu Routing→VRRP→Basic Config to load the following page.
The following entries are displayed on this screen:
VRRP Basic Config

VRID:
Interface:
Virtual IP:
Create:
Clear:
VRRP Table

Select:
VRID:
Interface:
Interface IP:
Figure10-59 VRRP Basic Config
Enter the VRID only if you are creating a new VRRP. The
VRID ranges from 1 to 255.
Select the Interface ID for the new VRRP.
Enter the IP Address associated with the new VRRP.
Click the button to add a new VRRP.
Click the button to clear the configuration.
Select one or more items.
Displays the VRID associated with the VRRP.
Displays the Interface ID associated with the VRRP.
Displays the IP Address associated with the selected
interface.
215