Rp Mapping - TP-Link JetStream T2700G-28TQ User Manual

Priority:
Interval:
PIM SM Candidate RP Table

Interface:
Priority:
Interval:
Next advertisement
time:

11.4.5 RP Mapping

Choose the menu Multicast Routing→PIM SM→RP Mapping to load the following page.
The following entries are displayed on this screen:
Search Option

Search Option:
Group to RP Mappings Information

Group:
RP:
Info Source:
Priority:
Holdtime:
Expires
Specify the priority of the candidate RP. The default value is
192.
Specify the interval of advertisement message of the
candidate RP in seconds. The default value is 60.
Displays the VLAN interface of the candidate RP.
Displays the priority of the candidate RP.
Displays the interval of the candidate RP.
Displays the remaining time to send the next RP
advertisement packet.
Figure 11-24 RP Mapping
ALL: Select All to display all entries.

Group: Select Group and enter the group IP address of

desired entry.
RP: Select RP and enter the RP IP address of desired

entry.
Displays the group address.
Displays the RP address.
Displays the BSR address which announce the RP
information.
Displays the priority of the RP.
Displays the holdtime of the RP.
Displays the expiry time of the RP. If RP is static, the expiry
time will be Never.
258