Multicast Ip; Multicast Ip Table - TP-Link JetStream T2700G-28TQ User Manual

Configuration Procedure

Step Operation
1 Create VLANs
2 Configure ports
3 Enable
Snooping function
4 Enable
VLAN
5 Check Multicast VLAN

9.3 Multicast IP

In a network, receivers can join different multicast groups appropriate to their needs. The switch
forwards multicast streams based on multicast address table. The Multicast IP can be
implemented on Multicast IP Table and Static Multicast IP page.

9.3.1 Multicast IP Table

On this page you can view the multicast IP table on the switch.
Choose the menu Multicast→Multicast IP→Multicast IP Table to load the following page.
Description
Create three VLANs with the VLAN ID 3, 4 and 5 respectively,
and specify the description of VLAN3 as Multicast VLAN on
VLAN→802.1Q VLAN page.
On VLAN→802.1Q VLAN function pages.
For port 3, configure its link type as GENERAL and its egress rule
as TAG, and add it to VLAN3, VLAN4 and VLAN5.
For port 4, configure its link type as GENERAL and its egress rule
as UNTAG, and add it to VLAN3 and VLAN 4.
For port 5, configure its link type as GENERAL and its egress rule
as UNTAG, and add it to VLAN3 and VLAN 5.
Enable IGMP Snooping function globally on Multicast→IGMP
IGMP
Snooping→Snooping Config page. Enable IGMP Snooping
function for port 3, port4 and port 5 on Multicast→IGMP
Snooping→Port Config page.
Multicast Enable Multicast VLAN, configure the VLAN ID of a multicast
VLAN as 3 and keep the other parameters as default on
Multicast→IGMP Snooping→Multicast VLAN page.
Port 3-5 and Multicast VLAN 3 will be displayed in the IGMP
Snooping
Snooping→Snooping Config page.
Figure 9-9 Multicast IP Table
Status table on
135
the Multicast→IGMP