TP-Link JetStream T2700G-28TQ User Manual page 18

Chapter
Chapter 17 Cluster
Chapter 18 Maintenance
Chapter 19 System
Maintenance via FTP
Appendix A Specifications
Appendix B Configure the PCs
Appendix C 802.1X Client
Software
Appendix D Glossary
Introduction
This module is used to configure cluster function to centrally
manage the scattered devices in the network. Here mainly
introduces:
NDP: Configure NDP function to get the information of the

directly connected neighbor devices.
NTDP: Configure NTDP function for the commander switch to

collect NDP information.
Cluster: Configure cluster function to establish and maintain cluster.

This module is used to assemble the commonly used system
tools to manage the switch. Here mainly introduces:
System Monitor: Monitor the memory and CPU of the switch.

Log: View and configure the system log function.

Device Diagnostics: Including Cable Test and Loopback. Cable

Test tests the connection status of the cable connected to the
switch; and Loopback tests if the port of the switch and the
connected device are available.
Network Diagnostics: Test if the destination is reachable and

the account of router hops from the switch to the destination.
Introduces how to download firmware of the switch via FTP
function.
Lists the glossary used in this manual.
Introduces how to configure the PCs.
Introduces how to use 802.1X Client Software provided for
authentication.
Lists the glossary used in this manual.
6
Return to CONTENTS