Instance Port Config - TP-Link JetStream T2700G-28TQ User Manual

VLAN ID:
Instance Config

Select:
Instance ID:
Status:
Priority:
VLAN ID:
Show All:
Clear All:
Note:
In a network with both GVRP and MSTP enabled, GVRP packets are forwarded along the CIST. If
you want to announce a specific VLAN through GVRP, please be sure to map the VLAN to the
CIST when configuring the MSTP VLAN-instance mapping table. For detailed introduction of
GVRP, please refer to GVRP function page.

8.3.3 Instance Port Config

A port can play different roles in different spanning tree instance. On this page you can configure
the parameters of the ports in different instances as well as view status of the ports in the specified
instance.
Enter the desired VLAN ID. Click 'Add' button, the new VLAN ID will be
added to the corresponding instance ID and the previous VLAN ID
won't be replaced. Click 'Delete' button, the VLAN ID will be delete
from the corresponding instance ID.
Select the desired Instance ID for configuration. It is multi-optional.
Displays Instance ID of the switch.
Displays status of the instance.
Enter the priority of the switch in the instance. It is an important
criterion on determining if the switch will be chosen as the root bridge
in the specific instance.
Enter the VLAN ID which belongs to the corresponding instance ID.
After modification here, the previous VLAN ID will be cleared and
mapped to the CIST.
Click the Show All button to show all VLAN IDs mapped to the
instance ID.
Click the Clear All button to clear up all VLAN IDs from the instance
ID. The cleared VLAN ID will be automatically mapped to the CIST.
113