Cluster Config - TP-Link TL-SG3210 User Manual

For a member switch, the following page is displayed:

The following entries are displayed on this screen:
Global Config

Cluster:
Cluster Role:
Cluster Name:
Commander MAC:
For an individual switch, the following page is displayed:

The following entries are displayed on this screen:
Global Config

Cluster:
Cluster Role:

14.3.2 Cluster Config

On this page you can configure the status of the cluster the switch belongs to.
Figure 14-10 Cluster Summary for Member Switch
Displays the cluster status (enabled or disabled) of the switch.
Displays the role the switch plays in the cluster.
Displays the name of the current cluster the switch belongs to.
Displays the MAC address of the commander switch.
Figure 14-11 Cluster Summary for Individual Switch
Displays the cluster status (enabled or disabled) of the switch.
Displays the role the switch plays in the cluster.
230