Proxy Arp (License Required) - TP-Link JetStream T2700G-28TQ User Manual

Choose the menu Routing→DHCP Relay→DHCP Server to load the following page.
The following entries are displayed on this screen:
Add DHCP Server Address

Interface ID:
Server Address:
DHCP Server List

Select:
Interface ID:
Server Address:
Configuration Procedure:
Step Operation
1 Enable DHCP Relay.
2 Configure Option
support.
3 Configure DHCP Server.

10.6 Proxy ARP (License Required)

Proxy ARP functions to realize the Layer 3 connectivity between the hosts within the same
network segment but isolated at Layer 2.
When an ARP request of a host is to be forwarded to another host in the same network segment
but isolated at Layer 2, to realize the connectivity, the device connecting the two virtual networks
should be able to respond to this request. This can be achieved by the device running proxy ARP.
Figure 10-20 DHCP Server
Select the interface type and enter the interface ID.
Enter the DHCP server IP address.
Select the desire DHCP server item.
Displays the interface ID.
Displays the DHCP server address.
Description
Required. On the Routing→DHCP Server→Global Config
page, enable the DHCP Server function, and the DHCP
Relay function will be enabled at the same time.
82 Optional. On the Routing→DHCP Relay→Global Config
page, configure the Option 82 parameters.
Required. On the Routing→DHCP Relay→DHCP Server
page, specify the DHCP Server with IP address.
165