Application Example For Static Routing - TP-Link JetStream T2700G-28TQ User Manual

The following entries are displayed on this screen:
Static Routing Config

Destination:
Subnet Mask:
Next Hop:
Distance:
Static Route Table

Select:
Destination
Address:
Subnet Mask:
Next Hop:
Distance:
Metric:
Interface Name:

10.3.2 Application Example for Static Routing

Network Requirements

A small enterprise network is divided into three VLANs: VLAN10, VLAN20 and VLAN30. Their

VLAN IDs are 10, 20 and 30 respectively.
PC1 is in VLAN10 and PC2 is in VLAN30. PC1 and PC2 are reachable for each other.

Network Diagram

Specify the destination IP address of the packets.
Specify the subnet mask of the destination IP address.
Enter the IP address to which the packet should be sent next.
Enter the distance metric of route. The smaller the distance is,
the higher the priority is.
Specify the static route entries to modify.
Displays the destination IP address of the packets.
Displays the subnet mask of the destination IP address.
Displays the IP address to which the packet should be sent next.
Displays the distance metric of route. The smaller the distance is,
the higher the priority is.
Displays the metric of the route.
Displays the name of the VLAN interface.
147