Configuration Procedure - TP-Link JetStream T2700G-28TQ User Manual

The following entries are displayed on this screen:
Packets Received

BOOTREQUEST:
DHCPDISCOVER:
DHCPREQUEST:
DHCPDECLINE:
DHCPRELEASE:
DHCPINFORM:
Packets Sent

BOOTREPLY:
DHCPOFFER:
DHCPACK:
DHCPNAK:

Configuration Procedure:

Step Operation
1 Set the link type for port.
2 Create VLAN.
3 Create VLAN interface.
4 Enable DHCP Server.
5 Configure Excluded IP
Address.
6 Configure IP Pool.
7 Bind IP Manually
Displays the Bootp Request packet received.
Displays the Discover packet received.
Displays the Request packet received.
Displays the Decline packet received.
Displays the Release packet received.
Displays the Inform packet received.
Displays the Bootp Reply packet sent.
Displays the Offer packet sent.
Displays the Ack packet sent.
Displays the Nak packet sent.
Description
Required. On the VLAN→802.1Q VLAN→Port Config page,
set the link type for the port basing on its connected device.
Required. On the VLAN→802.1Q VLAN→VLAN Config
page, click the Create button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
Required. On the Routing→Static Routing→Static Routing
Config page, create the interface IP address of the VLAN.
Required. On the Routing→DHCP Server→DHCP Server
page, enable the DHCP Server function.
Optional. On the Routing→DHCP Server→DHCP Server
page, configure the Excluded IP Address which cannot be
assigned by the switch.
Required. On the Routing→DHCP Server→Pool Setting
page, configure the parameters of IP Pool, including Mask,
lease time, gateway and DNS address.
Optional. On the Routing→DHCP Server→Manual Binding
page, you can specify the IP address for specific clients.
159