Choose the menu LLDP→Basic Config→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config
UNIT:
Select:
Port:
Admin Status:
Notification Mode:
Included TLVs:
16.2 Device Info
You can view the LLDP information of the local device and its neighbors on the Local Info and
Neighbor Info pages respectively.
Figure 16-2 Port Configuration
Select the unit ID of the desired member in the stack.
Select the desired entry for configuration. It is multi-optional.
Displays the port number to be configured.
Configure the ports' LLDP state.
Enable/Disable the ports' SNMP notification.
Select TLVs to be included in outgoing LLDPDU.
346