Cluster Config - TP-Link TL-SL5428E User Manual
24-port 10/100mbps + 4-port gigabit l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (307 pages)
Table of Contents
Advertisement
The following entries are displayed on this screen:
Global Config
Cluster:
Cluster Role:
15.3.2 Cluster Config
On this page you can configure the status of the cluster the switch belongs to.
Choose the menu Cluster→Cluster→Cluster Config to load the following page.
For a candidate switch, the following page is displayed.
Figure 15-13 Cluster Configuration for Candidate Switch
The following entries are displayed on this screen:
Current Role
Role:
Role Change
Individual:
Commander:
For a commander switch, the following page is displayed.
Displays the cluster status (enabled or disabled) of the switch.
Displays the role the switch plays in the cluster.
Displays the role the current switch plays in the cluster.
Select this option to change the role of the switch to be individual
switch.
Select this option to change the role of the switch to be
commander switch, and then configure the cluster:
Cluster Name: Configure the name of the current cluster the
switch belongs to.
IP Pool & Mask: Configure the private IP range of the member
switches in the cluster.
204
Advertisement
Table of Contents
