Event - TP-Link JetStream T2700G-28TQ User Manual

Choose the menu SNMP→RMON→History to load the following page.
The following entries are displayed on this screen:
History Control Table

Select:
Index:
Port:
Interval:
Max Buckets
Owner:
Status:

15.3.3 Event

On this page, you can configure the RMON events.
Figure 15-10 History Control
Select the desired entry for configuration.
Displays the index number of the entry.
Specify the port from which the history samples were taken, in
format as 1/0/1.
Specify the interval to take samplings from the port, ranging from
10 to 3600 seconds. The default is 1800 seconds.
Displays the maximum number of buckets desired for the RMON
history group of statistics, ranging from 1 to 65535. The default is
50 buckets. 130 buckets supported at most so far.
Enter the name of the device or user that defined the entry.
Select Enable/Disable the corresponding sampling entry.
337