TP-Link JetStream T2700G-28TQ User Manual page 184

Choose the menu Routing→RIP→Basic Config to load the following page.
The following entries are displayed on this screen:
RIP Enable

RIP Protocol:
Global Config

RIP Version:
Figure 10-27 RIP Basic Config
Choose to enable or disable the RIP function. By default is
disable.
Choose the global RIP version.
Default: send with RIP version 1 and receive with both

RIP version 1 and 2.
RIPv1:send and receive RIP version 1 formatted packets

via broadcast.
RIPv2:send and receive RIP version 2 packets using

multicast.
172