Instance Port Config - TP-Link TL-SG3210 User Manual

VLAN-Instance Mapping

VLAN ID:
Instance ID:
Note:
In a network with both GVRP and MSTP enabled, GVRP packets are forwarded along the CIST. If
you want to broadcast packets of a specific VLAN through GVRP, please be sure to map the VLAN
to the CIST when configuring the MSTP VLAN-instance mapping table. For detailed introduction of
GVRP, please refer to GVRP function page.

7.3.3 Instance Port Config

A port can play different roles in different spanning tree instance. On this page you can configure
the parameters of the ports in different instance IDs as well as view status of the ports in the
specified instance.
Choose the menu Spanning Tree → MSTP Instance → Instance Port Config to load the
following page.
Enter the desired VLAN ID. After modification here, the new VLAN ID
will be added to the corresponding instance ID and the previous VLAN
ID won't be replaced.
Enter the corresponding instance ID.
Figure 7-9 Instance Port Config
101