Instance Port Config - TP-Link T1700G-28TQ User Manual

The following entries are displayed on this screen:
VLAN-Instance Mapping

Instance ID:
VLAN ID:
Instance Table

Select:
Instance ID:
Status:
Priority:
VLAN ID:
Clear All:

8.3.3 Instance Port Config

A port can play different roles in different spanning tree instance. On this page you can configure
the parameters of the ports in different instance IDs as well as view status of the ports in the
specified instance.
Enter the corresponding instance ID.
Enter the desired VLAN ID. After modification here, the new VLAN ID
will be added to the corresponding instance ID and the previous
VLAN ID won't be replaced.
Select the desired Instance ID for configuration. It is multi-optional.
Displays Instance ID of the switch.
Displays status of the instance.
Enter the priority of the switch in the instance. It is an important
criterion on determining if the switch will be chosen as the root bridge
in the specific instance.
Enter the VLAN ID which belongs to the corresponding instance ID.
After modification here, the previous VLAN ID will be cleared and
mapped to the CIST.
Click Clear All to clear up all VLAN IDs from the instance ID. The
cleared VLAN ID will be automatically mapped to the CIST.
105