Adjustment/Maintenance - Kyocera ECOSYS M2030dn Operation Manual

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
• Copy Denst. Adj. ...8-116
• Send/Box Density ...8-117
• Backgrnd Density ...8-117
• Print Density ...8-118
• Correct. Bk Line ...8-119
• New Developer...8-120
• DP Adjustment...8-121
NOTE:
If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Copy Denst. Adj.
Adjust copy density. Adjustment can be made in 7 levels.
Use the procedure below to adjust the copy density.
Sys. Menu/Count.:a b
:
Document Box
;
Edit Destination
<
*********************
Adjust/Maint.
Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Backgrnd Density
Copy Denst. Adj.: a b
3
4 *
*********************
5
[ Exit
a b
[ Exit
-1
0 Normal
+1
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Adjust/Maint.].
]
2
Press the OK key. The Adjust/Maint. menu appears.
]
3
Press the  or  key to select [Copy Denst. Adj.].
4
Press the OK key. Copy Denst. Adj. appears.
5
Press the  or  key to select the density from
[-3 Lighter] to [+3 Darker].
6
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
8-116
Default Setting (System Menu)