Kyocera ECOSYS M2030dn Operation Manual page 354

TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default setting is Off.
Use the procedure below to setup the TCP/IP (IPv6) setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
Network Setting: a b
1
*********************
TCP/IP Setting
2
WSD-SCAN
3
WSD-PRINT
TCP/IP Settings: a b
1
*********************
TCP/IP
2
IPv4 Setting
3
IPv6 Setting
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
5
6
[ Exit ]
7
8-146
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System/Network menu appears.
Press the  or  key to select [Network Setting].
Press the OK key. The Network Setting menu appears.
Press the  or  key to select [TCP/IP Settings].
Press the OK key. The TCP/IP Settings menu appears.
Press the  or  key to select [IPv6 Setting].
Default Setting (System Menu)