Setting E-Mail Subject - Kyocera ECOSYS M2030dn Operation Manual

Enter destination.

Setting E-mail Subject

Set the subject automatically entered when sending job log histories by e-mail.
Use the procedure below to set the subject.
Job Log History:
2
Send History
3
Destination
4
*********************
Subject
Subject:
%printer*
IMPORTANT:
destination is displayed. Refer to Registering Destination on
page 7-15 and register the desired destination
3
Press [Yes] (the Left Select key). Accepted. is displayed
and the job log is sent to the registered destination
before the screen returns to the Job Log History menu.
1
In the Job Log History menu, press the  or  key to
a b
select [Subject].
[ Exit ]
2
Press the OK key. Subject appears.
B b
ABC
[ Text ]
3
Enter the e-mail subject.
NOTE:
details on entering characters.
4
Press the OK key. Completed. is displayed and the
screen returns to the Job Log History menu.
7-17
If no destination is registered, Enter
Refer to Character Entry Method on Appendix-5 for
Status / Job Cancel
7