Kyocera ECOSYS M2030dn Operation Manual page 118

Ready to send.
Dest.:
p :sally@###########N
1-sided 300x300dpi
[ Duplex ] [ScanRes.]
Dest. Confirm.:
p Morgan@###########N
*********************
p aaaaaaaaa@########N
p bbbbbbbbb@########N
[ Exit
6
Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
1
NOTE:
If the screen for confirming the entry of a new
destination (page 8-107) is set to [On], a screen to confirm
the entered e-mail address appears. Enter the same e-mail
address again and press the OK key.
7
If there are additional destinations, press the Add
Destination key. Repeat steps 2 to 5 to enter additional
destinations. Up to 100 destinations can be specified.
8
Press the Confirm Destination key to confirm the
registered destinations.
Press the  or  key to select a destination and press
a b
the OK key. Then, you can edit or delete the destination.
Press [Exit] (the Right Select key) to return to the basic
screen.
]
9
Press the Start key. Transmission starts.
NOTE:
If the screen for confirming the destination before
transmission (page 8-107) is set to [On], the Confirm
Destination screen appears when the Start key is pressed.
3-20
Basic Operation