Kyocera ECOSYS M2030dn Operation Manual page 243

Low Power Timer
The time until the machine enters low power mode can be set. The range that can be set is as follows.
Use the procedure below to set the Low Power Timer. The default setting is 1 minute.
Sys. Menu/Count.: a b
3
System/Network
4
User/Job Account
5
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
Login User Name:
*******************
Login Password:
Timer Setting:
1
*********************
Auto Panel Reset
2
PanelReset Timer
3
Low Power Timer
For Europe
30 ppm model: 1 to 60 minutes (1minute increments)
35 ppm model: 1 to 120 minutes (1minute increments)
Except for Europe
1 to 240 minutes (1minute increments)
[ Exit ]
[ Exit ]
L b
[ Login ]
a b
[ Exit ]
Value
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
3
Press the  or  key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4
The Timer Settings menu appears.
5
Press the  or  key to select [Low Power Timer].
8-35
Default Setting (System Menu)
8