Kyocera ECOSYS M2030dn Operation Manual page 377

LAN Interface
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
Optional Network:a b
1
Basic
Basic:
1
*********************
Host Name
2
TCP/IP Settings
3
Bonjour
1
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System/Network menu appears.
a b
[ Exit ]
3
Press the  or  key to select [Optional Network].
4
Press the OK key. The Optional Network screen
appears.
[ Exit ]
5
Press the  or  key to select [Basic].
6
Press the OK key. The Basic menu screen appears.
a b
[ Exit ]
7
Press the  or  key to select [LAN Interface].
8-169
Default Setting (System Menu)
8