Send as E-mail
Sends a scanned original image as an E-mail attachment.
NOTE:
•
You must have a network environment in which this machine can connect to a mail server. It is recommended
that the machine be used in an environment in which it can connect to the mail server at any time over a LAN.
•
Access the Command Center RX beforehand and specify the settings required for sending e-mail. For details,
refer to the Command Center RX on page 2-29.
•
Refer to Command Center RX on 2-29 for details on entering characters.
Send to:
1
p E-mail
*********************
2
G Folder(SMB)
3
H Folder(FTP)
Address Entry:
*
1
Press the Send key.
Displays the screen for sending.
2
Place the originals on the platen or in the document
processor.
NOTE:
Originals on page 2-59.
3
Press the or key to select [E-mail].
a b
4
Press the OK key. Address Entry appears.
B b
ABC
[ Text
]
5
Enter the destination e-mail address.
NOTE:
Book or the One-touch keys. Refer to Specifying
Destination on page 3-25.
3-19
For loading instructions, refer to Loading
Destination can be specified using the Address
Basic Operation
3