Kyocera ECOSYS M2030dn Operation Manual page 241

Timer Setting:
1
*********************
Auto Panel Reset
2
PanelReset Timer
3
Low Power Timer
Auto Err. Clear: a b
1 *Off
*********************
2
On
• Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options are
between 5 and 495 seconds (every five seconds). The default setting is 30 seconds.
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
Sys. Menu/Count.: a b
3
System/Network
4
User/Job Account
5
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
4
The Timer Settings menu appears.
a b
[ Exit ]
5
Press the  or  key to select [Auto Err. Clear].
6
Press the OK key. Auto Err. Clear appears.
7
Press the  or  key to select [Off] or [On].
8
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
[ Exit ]
2
Press the OK key. The Common Settings menu appears.
[ Exit ]
8-33
Default Setting (System Menu)
8