Command Center Rx - Kyocera ECOSYS M2030dn Operation Manual

Command Center RX

If the machine is connected to the network, you can configure various settings using Command Center RX. This
section explains how to access Command Center RX, and how to change security settings and the host name. For
details on Command Center RX, refer to the Command Center RX User Guide.
NOTE:
To fully access the features of the Command Center RX pages, enter the User Name and Password and
click [Login]. Entering the predefined administrator password allows the user to access all pages, including
Document Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user
with administrator privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished (case sensitive).
Settings that the administrator and general users can configure in Command Center RX are as follows.
Setting
Device Information
Job Status
Document Box
Address Book
Device Settings
Function Settings
Network Settings
Security Settings
Management Settings
*1 The fax function only shows ECOSYS M2530dn/ECOSYS M2535dn.
*2 The logged in user may not be able to configure some settings, depending on the permissions of the user.
*3 This is displayed when the optional Card Authentication Kit is installed.
Admin
Admin
Description
The machine's structure can be checked,.
[Configuration], [Counter], [About Command Center RX]
Displays all device information, including print and scan
jobs, storing jobs, scheduled jobs, and job log history.
[Printing Jobs Status], [Printing Job Log], [Sending Job
Status], [Scheduled Jobs], [Sending Job Log], [Storing Job
Status], [Storing Job Log]
Add or delete document boxes, or delete documents
within a document box.
*1
[Sub Address Box] , [Polling Box]
Create, edit, or delete addresses and address groups.
[Machine Address Book], [External Address Book
Settings], [One Touch Key]
Configure the advanced settings of the machine.
[Paper/Feed/Output], [Original Settings], [Energy Saver/
Timer], [Date/Time], [System]
Configure the advanced function settings.
[Common/Job Defaults], [Copy], [Printer], [E-mail], [Scan
*1
to Folder], [FAX] , [Send and Forward],
*1
[Forward Rules] , [Operation Panel]
Configure the network advanced settings.
[General], [TCP/IP], [Protocol]
Configure the security advanced settings.
[Device Security], [Send Security], [Network Security],
[Certificates]
Configure the advanced management settings.
[Job Accounting], [Authentication], [ID Card]
[Notification/Report], [History Settings], [SNMP], [Reset]
*1
, [Job Box Settings]
*3
,
2-29
Preparation before Use
Adminis- General
trator User
○ ○
○ ○
*2
○ ○
*2
○ ○
○ -
○ -
○ -
○ -
○ -
2