Kyocera ECOSYS M2030dn Operation Manual page 357

WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
Network Setting: a b
1
*********************
TCP/IP Setting
2
WSD-SCAN
3
WSD-PRINT
WSD-SCAN
1
Off
2 *On
*********************
1
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System/Network menu appears.
a b
[ Exit ]
3
Press the  or  key to select [Network Setting].
4
Press the OK key. The Network Setting menu appears.
5
Press the  or  key to select [WSD-SCAN].
6
Press the OK key. The WSD-SCAN menu appears.
a b
7
Press the  or  key to select [On] or [Off].
8
Press the OK key. Completed. is displayed and the
screen returns to the Network Settings menu.
8-149
Default Setting (System Menu)
8