Kyocera ECOSYS M2030dn Operation Manual page 310

Destination confirmation screen before transmission
You can specify whether or not the destination confirmation screen appears after the Start key is pressed or after a
destination is added or edited before transmission.
The table below shows the available settings.
Check beforeSend
Check New Dest.
Sys. Menu/Count.:a b
6
Copy
7
Printer
8
*********************
Send
Send:
1
*********************
Select Key Set.
2
DestinationCheck
3
Default Screen
DestinationCheck:a b
1
*********************
Check beforeSend
2
Check New Dest.
Check beforeSend:a b
1 *Off
*********************
2
On
Item
Specify whether or not the destination
confirmation screen appears before
transmission.
Specify whether or not the destination
confirmation screen appears when the
destination is new.
1
[ Exit ]
2
a b
[ Exit ]
3
4
[ Exit ]
5
6
7
8
8-102
Detail
In the Sys. Menu/Count. menu, press the  or  key to
select [Send].
Press the OK key. The Send menu appears.
Press the  or  key to select [DestinationCheck].
Press the OK key. The destination confirmation menu
appears.
Press the  or  key to select [Check beforeSend] or
[Check New Dest.].
Press the OK key. The menu of the selected function
appears.
The screen when the Check before Send menu is
selected is shown.
Press the  or  key to select the desired function.
Press the OK key. Completed. is displayed and the
screen returns to the Send menu.
Default Setting (System Menu)