Kyocera ECOSYS M2030dn Operation Manual page 258

Function Default: a b
1
*********************
Color Selection
2
Scan Resolution
3
FAX Resolution
Zoom:
1 *100%
*********************
2
Auto
Collate
Set the defaults for Collate. The table below shows the available settings.
Collate
NOTE:
Refer to page 3-15 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
Sys. Menu/Count.: a b
3
System/Network
4
User/Job Account
5
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
[ Exit ]
a b
Item
Off Collate not performed.
On Collate performed.
[ Exit ]
[ Exit ]
4
Press the OK key. The Function Default menu appears.
5
Press the  or  key to select [Zoom].
6
Press the OK key. Zoom appears.
7
Press the  or  key to select [100%] or [Auto].
8
Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Description
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
3
Press the  or  key to select [Function Default].
8-50
Default Setting (System Menu)