Ssl Setting - Kyocera ECOSYS M2030dn Operation Manual

IPSec:
1 *Off
*********************
2
On
Rule Setting:
1 *Off
*********************
2
On

SSL Setting

This allows you to use SSL network security for communication. You can use SSL Setup to select whether or not SSL
is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make this setting when you use SSL. The default setting is On.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
*********************
System/Network
Login User Name:
*******************
Login Password:
System/Network:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
6
Press the OK key. IPSec appears.
a b
7
Press the  or  key to select [On] or [Off].
If you select [On] and press the OK key, Rule Setting
a b
appears. Press the  or  key to select [On] or [Off].
8
Press the OK key. Completed. is displayed and the
screen returns to the Network Setting menu.
1
In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System/Network menu appears.
a b
[ Exit ]
3
Press the  or  key to select [Network Setting].
8-155
Default Setting (System Menu)
8