Installing Software - Kyocera ECOSYS M2030dn Operation Manual

Installing Software

Install appropriate software on your PC from the included DVD (Product Library) if you want to use the printer function
of this machine or perform TWAIN / WIA transmission or Network FAX transmission from your PC.
Software on DVD (Windows)
You can use either [Express Install] or [Custom Install] can be selected for the installation method. [Express Install]
is the standard installation method. To install components that cannot be installed by [Express Install], use [Custom
Install]. For details, refer to Custom Install in the Installing Printer Driver in Windows on page 2-17.
Software
KX DRIVER
KX XPS DRIVER
KPDL mini-driver/
PCL mini-driver
Kyocera TWAIN Driver
Kyocera WIA Driver
FAX Driver
Status Monitor
KYOCERA Net Direct
Print
Description
This driver enables files on a computer to be printed by
the machine. Multiple page description languages
(PCL XL, KPDL, etc.) are supported by a single driver.
This printer driver allows you to take full advantage of
the features of the machine.
Use this driver to print PDF files.
This printer driver supports the XPS (XML Paper
Specification) format developed by Microsoft
Corporation.
This is a Microsoft MiniDriver that supports PCL and
KPDL. There are some restrictions on the machine
features and option features that can be used with this
driver.
This driver enables scanning on the machine using a
TWAINcompliant software application.
WIA (Windows Imaging Acquisition) is a function of
Windows that enables reciprocal communication
between an imaging device such as a scanner and an
image processing software application. An image can
be acquired using a WIA-compliant
software application, which is convenient when a
TWAINcompliant software application is not installed in
the computer.
This makes it possible to send a document created in a
computer software application as a fax via the
machine.
The Status Monitor shows a print system status
message at the bottom right of the printing screen. You
can also start Command Center RX to check and
change printer settings.
This makes it possible to print a PDF file without
starting Adobe Acrobat/Reader.
2-16
Preparation before Use
Installation method
●: Standard installation
○: Allows selection of
the components to be
installed
Express Custom
Install Install
○
●
○
-
○
-
○
●
○
-
○
-
○
●
○
-