One-Touch Keys And Program Keys - Kyocera ECOSYS M2030dn Operation Manual

One-Touch Keys and Program Keys

The one-touch keys and program keys on the operation panel are described below.
One-Touch Key
Register destinations to one-touch keys, and you can enter the desired destination by pressing the applicable one-
touch key. For registering a destination to a one-touch key, refer to Adding a Destination on One-touch Key on page
8-133.
Entering Destination with One-touch Key
Address Entry:
*
Address Entry
5y@###########.co.jp*
Program Keys
Settings of various functions frequently used for copying and sending can be collectively registered as a program.
Then, you can change the current settings of various functions to the registered settings by just pressing one of the
Program 1 to 4 keys.
NOTE:
The following functions are already registerd in Program 1 key. This function allows you to copy the front and
back sides of ID card or other document that is smaller than Stetement or A5 size onto a single page. Although the
functions are deleted by overwriting Program 1 key, you can register the same settings using the Function Menu
key.
Combine: 2 in 1
Continuous Scan: On
Original Size: Statement (Inch models)/A5 (Metric models)
Paper Selection: Cassette 1
Zoom Options: Auto Zoom
1
In Address Entry, press the one-touch key where the
B b
desired destination is registered.
Recalling from One-touch Keys 1 to 11
ABC
Press the one-touch key where the destination is
registered.
[ Text ]
Recalling from One-touch Keys 12 to 22
Press the Shift Lock key to turn on the lamp next to the
keys, and then press the one-touch key where the
destination is registered.
2
The destination registered to the one-touch key is
A b
recalled and automatically entered on the screen.
ABC
[ Text ]
3-3
Basic Operation
3