Kyocera ECOSYS M2030dn Operation Manual page 328

Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Backgrnd Density
Correct. Bk Line: a b
1 *Off
*********************
2
On(Low)
3
On(High)
New Developer
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
Sys. Menu/Count.:a b
:
Document Box
;
Edit Destination
<
*********************
Adjust/Maint.
Adjust/Maint.:
1
*********************
Copy Denst. Adj.
2
Send/Box Density
3
Backgrnd Density
Service Setting: a b
1
*********************
Service Status
2
Network Status
3
New Developer
2
a b
[ Exit ]
3
4
5
6
1
[ Exit ]
2
a b
[ Exit ]
3
4
[ Exit ]
5
8-120
Press the OK key. The Adjust/Maint. menu appears.
Press the  or  key to select [Correct. Bk Line].
Press the OK key. Correct. Bk Line appears.
Press the  or  key to select [Off], [On(Low)] or
[On(High)].
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
In the Sys. Menu/Count. menu, press the  or  key to
select [Adjust/Maint.].
Press the OK key. The Adjust/Maint. menu appears.
Press the  or  key to select [Service Setting].
Press the OK key. The Service Setting menu appears.
Press the  or  key to select [New Developer].
Default Setting (System Menu)