Backgrnd Density - Kyocera ECOSYS M2030dn Operation Manual

Backgrnd Density

Removes dark background from originals, such as newspapers.
If the ground color is obtrusive, select [Auto]. If [Auto] does not remove the ground color, select [Manual] and adjust
the density of the ground color.
The setting items are as follows.
Item
Off
Auto
Manual
The procedure for adjusting the background density of copies is explained below.
Function Menu:
1 Color Selection T
*********************
2
Original Size
3
Original Image
Backgrnd Density: a b
1 *Off
*********************
2
Auto
3
Manual
Manual:
3
3
4
4
5 *5 (Darker)
*********************
Does not adjust the ground color.
Automatically adjusts the background density based on the original.
Manually adjust the density in 5 levels. When [Manual] is selected, press [1 (Lighter)] to
[5 (Darker)] to adjust the background density.
a b
T
T
[ Exit ]
a b
Description
1
Press the Send key.
2
Place the originals in the document processor or on the
platen.
3
Press the Function Menu key. Function Menu appears.
4
Press the  or  key to select [Backgrnd Density].
5
Press the OK key. Backgrnd Density appears.
6
Press the  or  key to select [Off], [Auto] or [Manual].
7
Press the OK key.
When [Manual] is selected, Manual appears. Press the
 or  key to select [1 (Lighter)] to [5 (Darker)] and then
press the OK key.
Completed. is displayed and the screen returns to the
basic screen for copying.
8
Press the Start key to start sending.
NOTE:
Press the Reset key to reset the settings selected in
Function Menu.
5-24
Sending Functions