Kyocera ECOSYS M2030dn Operation Manual page 318

Use the procedure below to set Select Key Set.
Sys. Menu/Count.:a b
8
Send
9
FAX
:
*********************
Document Box
Document Box:
1
*********************
Sub Address Box
2
Select Key Set.
3
Polling Box
Select Key Set.: a b
1
*********************
Print
2
Store
Print:
1
*********************
Left
2
Right
Left:
3
Paper Selection
********************* 4 *Duplex
5
EcoPrint
This function is
already registered.
1
[ Exit ]
2
a b
3
[ Exit ]
4
[ Exit ]
5
6
a b
[ Exit ]
7
8
a b
9
10
IMPORTANT:
to the other flexible key, you cannot set it and This function is
already registered. is displayed.
8-110
In the Sys. Menu/Count. menu, press the  or  key to
select [Document Box].
Press the OK key. The Document Box menu appears.
Press the  or  key to select [Select Key Set.].
Press the OK key. Select Key Set. appears.
Press the  or  key to select [Print] or [Store].
Press the OK key. This displays the flexible key selection
screen for the function selected in step 5. The screen
shown is the one when [Print] is selected.
Press the  or  key to select [Left] or [Right].
Press the OK key. This displays the function selection
screen for the flexible key selected in step 7. The screen
shown is the one when [Left] is selected.
Press the  or  key to select the function you want to
register to the flexible key.
Press the OK key. Completed. is displayed and the
screen returns to the Document Box menu.
If you try to set the function that is registered
Default Setting (System Menu)