Kyocera ECOSYS M2030dn Operation Manual page 437

Overwrite.
Are you sure?
z k GUI DESIGN
[ Yes
Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Immediately *
Subsequently
Alert Only
*
Use the procedure below to apply the restriction limit.
Sys. Menu/Count.: a b
4
*********************
User/Job Account
5
User Property
6
Common Settings
Login User Name:
*******************
Login Password:
] [ No ]
Item
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the
subsequent job will be rejected.
Job continues while displaying an alert message.
The next job will be prohibited in sending or in storing in the box.
[ Exit ]
L b
[ Login ]
5
Repeat step 3 to 4 to set items as necessary.
6
Press the OK key again. A confirmation screen appears.
7
Press [Yes] (the Left Select key). The restriction of use
is changed. Registered. is displayed and the screen
returns to Account. List.
Description
1
Press the System Menu/Counter key on the main unit
operation panel.
2
Press the  or  key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE:
Refer to Character Entry Method on Appendix-5 for
details on entering characters.
3
The User/Job Account menu appears.
11-27
Management
11