Function Defaults - Kyocera ECOSYS M2030dn Operation Manual

Function Defaults

Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as defaults
makes subsequent jobs easier.
Color Selection
Select the default color mode setting. The available default settings are shown below.
Auto(Color/Gray)
Auto(Color/B&W)
Full Color
Grayscale
Black & White
Use the procedure below to select the default color mode setting.
Sys. Menu/Count.: a b
3
System/Network
4
User/Job Account
5
*********************
Common Settings
Common Settings: a b
1
*********************
Language
2
Default Screen
3
Sound
Function Default: a b
1
*********************
Color Selection
2
Scan Resolution
3
FAX Resolution
Color mode
Automatically recognizes whether the
document is color or black and white, and
scan color documents in Full Color and
black and white documents in Grayscale.
Automatically recognizes whether the
document is color or black and white, and
scan color documents in Full Color and
black and white documents in Black and
White.
Scan document in full color.
Scan document in grayscale for smoother
and finer finish.
Scan document in black and white.
[ Exit ]
[ Exit ]
[ Exit ]
Description
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
3
Press the  or  key to select [Function Default].
4
Press the OK key. The Function Default menu appears.
8-45
Default Setting (System Menu)
8