Network Setup (Lan Cable Connection) - Kyocera ECOSYS M2030dn Operation Manual

Network Setup (LAN Cable Connection)

The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4),
TCP/IP (IPv6), NetBEUI and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other
platforms.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC and your network environment.
For details of the procedure, refer to the Network Setup on page 8-136 or Network Security on page 8-154.
NOTE:
When Command Center RX is used, network parameters and security settings can be conveniently
changed and checked from your PC. For more information, refer to the Command Center RX User Guide.
Menu
System/ Network
Network Setting
Submenu
TCP/IP TCP/IP
Settings
IPv4 Setting
IPv6 Setting
Bonjour
Protocol Detail
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
NetBEUI
SNMPv3
FTP (Server)
FTP (Client)
SMB
SNMP
SMTP (E-mail TX)
POP3 (E-mail RX)
RAW Port
LPD
IPP
IPP Over SSL
HTTP
2-14
Preparation before Use
Setting
On/Off
On/Off
On/Off
IP address
IP address
IP address
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
Port number: 21
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
Port number: 631
On/Off
On/Off