File Format - Kyocera ECOSYS M2030dn Operation Manual

File Format

Select the file format of the image to send.
The table below lists the file formats and their details.
Adjustable range of image

File Format

PDF* 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)
TIFF 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)
XPS 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)
JPEG 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)
* The file format can be set to [PDF/A-1a] or [PDF/A-1b].
Use the procedure below to select the file format for transmission.
Function Menu:
1 Color Selection T
*********************
2
Original Size
3
Original Image
File Format:
1 *PDF
*********************
2
TIFF
3
XPS
quality
Auto Color (Color/Grayscale), Auto Color (Color/Black
and White), Full Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Auto Color (Color/Black
and White), Full Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Auto Color (Color/Black
and White), Full Color, Grayscale, Black and White
Auto Color (Color/Grayscale), Full Color, Grayscale
1
2
3
a b
T
T
[ Exit ]
4
5
a b
[ Detail ]
6
7
8
NOTE:
Function Menu.
5-9
Color mode
Press the Send key.
Place the original.
Press the Function Menu key. Function Menu appears.
Press the  or  key to select [File Format].
Press the OK key. File Format appears.
Press the  or  key to select the file format from [PDF],
[TIFF], [XPS] or [JPEG].
If Full Color or Grayscale has been selected for the color
mode for scanning, press [Detail] (the Right Select key)
and select the image quality.
If you selected PDF, you can specify PDF/A settings.
Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
Specify the destination, and press the Start key to start
sending.
Press the Reset key to reset the settings selected in
Sending Functions
5